About Standard Felt Liquid Filter Bags
Key benefits
Micron ratings from 1 to 200
All industry standard & custom sizes available
Broad chemical compatibility
High flow/low pressure drop
Sewn or fully-welded construction
Choice of steel ring or plastic flange
Temperature ratings to 200°F (PO), 275°F (PE ), 425°F (HT) and 500°F (Teflon®)
Felt Bag MaterialsConstructed using 100% synthetic fibers in polypropylene, polyester, Nomex® and Teflon®. The proper combination of fiber diameters, weights and thicknesses result in an economical depth filter media. To reduce fiber migration, Polypropylene bags are treated with a glazed finish, while Polyester and Nomex® bags are singed.
Polypropylene and Polyester materials meet FDA regulations for food contact under CFR21, Section 177.1520
Silicone-free construction
High dirt holding capacity
Ability to remove both solid and gelatinous particles
Low cost
Glazed/singed finish on Polypropylene & Polyester reduces fiber-shedding
Felt Bag StylesSteel-ring bags have a galvanized steel ring (stainless steel optional) sewn into the top of the bag. They are supplied with sewn seams standard. Plastic flange bags have a specially-designed flange sewn to the top of the bag. They are supplied with sewn seams standard (fully-welded seams available upon request).
Welded Construction
Fully-welded bags are available in polypropylene and polyester felt for #1, #2, #3, #4 and #5 plastic flanges.
No needle holes, thus increasing efficiencies by preventing by-pass
Elimination of threads further reduces possibility of fiber-shedding
Disclaimer: This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.
Additional Information
Material
Polyester Felt
Size
1 (7.06" x 16.5")
Micron Rating
1 Micron
Seam Type
Sewn
Ring Style
Galvanized Steel Ring
Case Pack
50 ea.
Pallet Pack
1,200 ea. (24 Cases)
FDA Approved
Yes
Dimensions
7.06" Dia. x 16.5" H
Country of Manufacture
United States
Model
PES1P1SH