KOSA Filtration · Sanitary Pumps & Systems
King Lai KL Series Sanitary Pump — Centrifugal · Self-Priming · Shearing
The King Lai KL series is a family of sanitary pumps covering four series — KL-C, KL-S, KL-L and KL-J — all of which pass 3A and CE certificates.
KOSA supplies King Lai KL series pumps for food, beverage, dairy, pharmaceutical and fine chemical duties, including the HL mixing system built on the same two pump principles.
Last updated:
Introduction
The pump section of the King Lai catalogue opens with the claim that KL series sanitary pumps are flexible in processing, with a low down rate and a long lifetime that keep running cost low in mass production. All KL series pumps pass 3A and CE certificates. Four series are listed — KL-C, KL-S, KL-L and KL-J — and each is described by one structural idea (A p4 L005–L035). The same catalogue section closes with the HL high efficiency mixing system, which combines both pump structures in one unit (A p4 L036–L039).
Features
- Four pump series: KL-C centrifugal, KL-S high efficiency, KL-L self-priming and KL-J shearing (A p4 L008, L027).
- All KL series pumps passed 3A and CE certificates (A p4 L007).
- KL-J shearing pump saves 10% of raw material cost by shearing and homogenising the product (A p4 L034–L035).
- HL high efficiency mixing system combines the self-priming and shearing pump structures for solid-liquid or liquid-liquid homogenisation (A p4 L036–L037).
- The catalogue states the HL system gives higher efficiency and more stable mixing quality than conventional agitation inside the mixing tank (A p4 L038–L039).
Specifications
| Parameter | Value |
|---|---|
| KL-C centrifugal | Volute housing for fluid transfer, big radius impeller |
| KL-S high efficiency | 0.5 mm clearance between impeller and pump housing |
| KL-L self-priming | Self-priming for bubble-containing media and CIP/SIP systems |
| KL-J shearing | Rotor and stator shear and homogenise, prevent agglomeration |
| Certificates | 3A and CE, all KL series |
| HL mixing system | Combines self-priming pump and shearing pump structures; solid-liquid or liquid-liquid homogenisation |
Data: King Lai catalog A p4. Confirm final selection against the manufacturer's datasheet.
How to choose
| Condition | Recommended |
|---|---|
| General transfer in food, beverage, dairy and alcohol lines | KL-C centrifugal pump with big radius impeller |
| Pharmaceutical duty needing a tight impeller-to-housing clearance | KL-S high efficiency pump, 0.5 mm clearance |
| Media containing air bubbles, or CIP/SIP circuits | KL-L self-priming pump |
Frequently asked questions
Which series make up the King Lai KL pump family?
The catalogue lists four series: KL-C, KL-S, KL-L and KL-J (A p4 L008, L027). (Source: King Lai catalog A p4 L002–L039.)
Which certificates do KL series pumps hold?
All KL series pumps passed 3A and CE certificates (A p4 L007). (Source: King Lai catalog A p4 L002–L039.)
What does the KL-J shearing pump save?
The rotor and stator design shears and homogenises the product and saves 10% of raw material cost (A p4 L034–L035). (Source: King Lai catalog A p4 L002–L039.)
Need a quote or full specification?
KOSA supplies King Lai KL series pumps — send your duty, materials and quantity for a matched proposal.
Request a quote