KOSA Filtration · Tubing & Fittings
King Lai 316L Sanitary Tube — Electropolished · 1/2–10 in
The King Lai 316L sanitary tube is a stainless steel tube for hygienic process lines, supplied in 304L, 316L and duplex grades with outside diameters from 1/2 to 10 in and lengths of 6 m or 6.1 m.
KOSA supplies King Lai 316L sanitary tube in project quantities, with the certificate pack agreed at order.
Last updated:
Introduction
Tubes are produced to ASME BPE, 3A, ISO, SMS, DIN, GB, JIS, IDF and BS standards. Electrical polishing, mechanical polishing, acid passivation and bright annealing are offered as surface treatments, and diameters above 10 in can be customised on request.
Features
- Grades: 304L, 316L and duplex stainless steel.
- Surface treatments: electrical polishing, mechanical polishing, acid passivation and bright annealing.
- Outside diameter 1/2–10 in, larger sizes on request.
- Length 6 m or 6.1 m, with customised lengths available.
- Certificates: 3A, EHEDG, CE and TS.
Specifications
| Parameter | Value |
|---|---|
| Material | 304L / 316L / duplex stainless steel A p7 L005(tube column, x645) |
| Tube types | Sanitary tubes, ultra-hygienic tubes, heat exchange tubes A p7 L002 (left part, tube column, x645) |
| Standards | ASME BPE, 3A, ISO, SMS, DIN, GB, JIS, IDF, BS A p7 L004 (right part, tube column, x645; catalogue spells it BEP) |
| Surface treatment | Electrical polishing / mechanical polishing / acid passivation / bright annealing A p7 L006–L007(tube column, x645) |
| Outside diameter | 1/2–10 in, larger sizes on request A p7 L008 (left part, tube column, x645) |
| Length | 6 m or 6.1 m, customised A p7 L009(tube column, x645) |
| Certificates | 3A, EHEDG, CE, TS A p7 L010(tube column, x645) |
Data: King Lai catalog A p7. Confirm final selection against the manufacturer's datasheet.
How to choose
| Condition | Recommended |
|---|---|
| When the wetted surface must be passivated and low-roughness | Choose electrically polished tube |
| When cost drives the line and roughness is not specified | Choose mechanically polished tube |
| When heat treatment follows forming | Choose bright annealed tube |
Frequently asked questions
Which standards does the King Lai 316L sanitary tube meet?
The King Lai 316L sanitary tube is produced to ASME BPE, 3A, ISO, SMS, DIN, GB, JIS, IDF and BS standards. [A p7]
What outside diameter range is available?
The King Lai 316L sanitary tube covers 1/2 to 10 in outside diameter, and larger sizes can be customised. [A p7]
Which certificates are supplied with the tube?
The King Lai 316L sanitary tube is supplied with 3A, EHEDG, CE and TS certificates, and is produced to 8 standards including ASME BPE and ISO. [A p7]
Need a quote or full specification?
KOSA supplies King Lai Tubes — send your duty, materials and quantity for a matched proposal.
Request a quote