KOSA Filtration

KOSA Filtration · Heat Exchangers

Point-of-Use WFI Heat Exchanger — Below 1500 L/h · Instant Cooling

The King Lai BioClean PoU heat exchanger is a point-of-use cooler designed for cooling Water for Injection at usage points with flow rates below 1500 L/h, with a thermal response within 10 seconds.

KOSA supplies the King Lai PoU range as standalone units or as plug-and-play modules for WFI loops.

King Lai BioClean point-of-use WFI heat exchanger, white housing with red KING LAI label and two process connections
King Lai Point-of-Use WFI Heat Exchanger · PoU · Source: King Lai catalog B p15

Introduction

The exchanger body is constructed from three-layer seamless stainless steel tubes formed in a single process, so there is no internal welding and no internal leakage path. On the cooling medium side, turbulence enhancers between the two outer tubes improve heat transfer; on the product side the flow path is completely smooth, with no gaps or dead legs. The tubes are bent into a 180 degree U-shape so the unit handles large temperature differences during heating, cooling or steam sterilization while eliminating thermal expansion stress.

Features

Specifications

ParameterValue
ApplicationCooling WFI at usage points, flow below 1500 L/h B p15 L003-L005
Standard models0-1000 L/h; 1000-1500 L/h B p15 L029
Thermal responseWithin 10 seconds B p15 L029
Cooling performanceAt 500 L/h: 85 °C to 40 °C or 25 °C B p15 L035-L036
Cooling performanceAt 1000 L/h: 85 °C to 40 °C or 25 °C B p15 L037-L038
Body constructionThree-layer seamless stainless steel tube, single process, no internal welding B p15 L008-L010
Product-side flow pathCompletely smooth, no gaps or dead legs B p15 L014-L016
Product-contact finishElectropolished, Ra below 0.4 μm B p15 L036-L037
Tube geometry180 degree U-bend to absorb thermal expansion B p15 L017-L021
ConfigurationStandalone unit or modular plug-and-play system B p15 L022-L024
SterilizationOnline with steam or superheated water B p15 L033-L034

Data: King Lai catalog B p15. Confirm final selection against the manufacturer's datasheet.

Frequently asked questions

What flow rates does the point-of-use exchanger cover?

The King Lai BioClean point-of-use WFI heat exchanger is available in two standard models, 0-1000 L/h and 1000-1500 L/h, for cooling Water for Injection at usage points with flow rates below 1500 L/h. (Source: King Lai catalog B p15 L005-L029)

How fast does it respond, and what cooling performance is quoted?

The King Lai BioClean point-of-use WFI heat exchanger has a quoted thermal response within 10 seconds. At 500 L/h the unit cools from 85 °C to 40 °C or to 25 °C; at 1000 L/h the same 85 °C inlet is cooled to 40 °C or 25 °C. (Source: King Lai catalog B p15 L029-L038)

Why is there no internal welding in the exchanger body?

In the King Lai BioClean point-of-use WFI heat exchanger the entire body is made from three-layer seamless stainless steel tubes formed in a single process, which removes internal welds and the internal leakage path they would create. (Source: King Lai catalog B p15 L008-L010)

Related reading

Related: DTS double tubesheet heat exchanger · for aseptic point-of-use valves on the same loop, see King Lai smart valve heads · Selection guide

Need a quote or full specification?

KOSA supplies King Lai PoU — send your duty, materials and quantity for a matched proposal.

Request a quote

Request a Quote from KOSA

Tell us about your 316L stainless piping, filtration, valve or heat-exchanger requirements. The responsible KOSA specialist will get back to you with a quotation and technical proposal.

✓ Our specialists typically reply within 24 hours on business days  ·  ✓ Your inquiry is confidential — no spam, no reselling.