KOSA Filtration

KOSA Filtration · Tubing & Fittings

King Lai Sanitary Fittings — Tri-Clamp · 3A

The King Lai sanitary fittings range is a set of clamp-type components — ferrules, clamps, elbows, tees and reducers in 304L, 316L or duplex stainless steel — used to join hygienic tube runs from 1/2 to 10 in outside diameter.

KOSA supplies King Lai sanitary fittings matched to the tube schedule of each project.

King Lai sanitary clamp-type fittings, assortment of clamps, elbows, tees, reducers and ferrules in stainless steel
King Lai sanitary fittings · Fittings · Source: King Lai catalog A p7 L004–L010

Last updated:

Introduction

Fittings share the surface treatments and diameter range of the matching tube: electrical polishing, mechanical polishing, acid passivation or bright annealing, with 1/2 to 10 in outside diameter and larger sizes on request.

Features

Specifications

ParameterValue
ConnectionClamp type (ferrule and clamp), per catalogue plate Catalogue plate F7 (A p7, fittings plate)
Material304L / 316L / duplex stainless steel A p7 L004(fittings column, x917)
StandardsASME BPE, 3A, ISO, SMS, DIN, GB, JIS, IDF, BS A p7 L002 (fittings column, x917; catalogue spells it BEP)
Surface treatmentElectrical polishing / mechanical polishing / acid passivation / bright annealing A p7 L005–L006(fittings column, x917)
Outside diameter1/2–10 in, larger sizes on request A p7 L007 (right part, fittings column, x917)
Certificates3A, CE, TS, plus a drinking-water approval A p7 L008 (right part, fittings column, x917)
Outside diameter, minimum1/2 in A p7 L007 (right part, fittings column, x917)

Data: King Lai catalog A p7. Confirm final selection against the manufacturer's datasheet.

How to choose

ConditionRecommended
When the joint must be opened daily for cleaningChoose tri-clamp fittings
When the joint is permanent and weld inspection is plannedChoose weld ferrules
When the line changes diameterChoose a concentric reducer

Frequently asked questions

Which certificates do King Lai sanitary fittings carry?

King Lai sanitary fittings are certified to 3A, CE and TS, plus a drinking-water approval for potable lines. [A p7]

What material are the fittings made from?

King Lai sanitary fittings are made in 304L, 316L and duplex stainless steel. [A p7]

Do the fittings match the tube outside diameters?

King Lai sanitary fittings follow the 1/2 to 10 in outside diameter range of the tube, and larger sizes can be customised. [A p7]

Need a quote or full specification?

KOSA supplies King Lai Fittings — send your duty, materials and quantity for a matched proposal.

Request a quote

Request a Quote from KOSA

Tell us about your 316L stainless piping, filtration, valve or heat-exchanger requirements. The responsible KOSA specialist will get back to you with a quotation and technical proposal.

✓ Our specialists typically reply within 24 hours on business days  ·  ✓ Your inquiry is confidential — no spam, no reselling.